Browsing Mechanical and Mechatronics Engineering by Subject "Sintering"
Now showing items 1-6 of 6
-
Additive Manufacturing of Ceramic Li7La3Zr2O12 Solid Electrolytes for Solid-State Battery Applications
(University of Waterloo, 2024-04-24)Solid-state lithium-ion batteries (SSLIB) are increasingly attracting attention due to their advantageous properties, including enhanced safety, non-flammability, higher energy density, durability, and lightweight design, ... -
Ag Nanoparticles and their Application in Low-Temperature Bonding of Cu
(University of Waterloo, 2014-01-03)Ag nanoparticle (NP) paste was fabricated and used to bond Cu wire to Cu foil at low temperatures down to 433 K. The relatively low bonding temperature promotes this method to be used in polymer-based flexible electronics, ... -
Binder Jetting and Heat Treatment of Ferrous Alloys
(University of Waterloo, 2019-08-15)Binder Jetting (BJ) is a manufacturing process that involves iterative and layer-wise deposition of powder material and an adhesive binder to construct geometrical features. It can be used to construct freeform and complex ... -
The mechanism of pore segregation in the sintered nano Ag for high temperature power electronics applications
(Elsevier, 2018-10-01)It is widely accepted that nano pores of sintered nanoparticles can coalesce into micro pores during high temperature service. When applying sintered nanoparticles in power electronics, the pore segregation and delamination ... -
Process Kinetics of Transient Liquid Phase
(University of Waterloo, 2007-09-24)The problem of inadequate measurement techniques for quantifying the isothermal solidification process during transient liquid phase sintering (TLPS) in binary isomorphous systems such as Ni-Cu, and the resulting uncertainty ... -
Process Mapping and Optimization of Titanium Parts Made by Binder Jetting Additive Manufacturing
(University of Waterloo, 2018-01-08)Additive manufacturing (AM) has recently seen an increase in adoption outside of its traditional role of rapid prototyping and is being used more and more for the production of functional components. The increased adoption ...