Spanwise flow development within a laminar separation bubble under natural and forced transition

dc.contributor.authorMichelis, Theodoros
dc.contributor.authorKotsonis, Marios
dc.contributor.authorYarusevych, Serhiy
dc.date.accessioned2018-04-03T17:08:21Z
dc.date.available2018-04-03T17:08:21Z
dc.date.issued2018-09-01
dc.descriptionThe final publication is available at Elsevier via http://dx.doi.org/10.1016/j.expthermflusci.2018.02.032 © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/en
dc.description.abstractThe variation of streamwise and spanwise characteristic wavelengths of a NACA 0018 laminar separation bubble under natural and periodic excitation conditions is investigated experimentally. Periodic forcing is applied with an AC-DBD plasma actuator, and the response of the bubble is characterised in two orthogonal planes by means of time-resolved particle image velocimetry. Periodic excitation results in substantial time-averaged size reduction of the bubble. Linear stability analysis is used to establish that the most notable flow deformation is achieved when excitation is applied at the most unstable frequency, which does not significantly vary (<4%) for the range of excitation parameters investigated. At excitation frequencies well below the unstable frequency band, the shear layer does not lock to the excitation and is, instead, modulated. Lock-in is achieved at higher forcing frequencies, which are within the unstable band. For the case of modulated shedding, spanwise deformations become more significant than in the natural case; whereas when shedding becomes locked to the excitation frequency, the coherence of the rollers along the span increases. Characteristic streamwise and spanwise wavelengths are statistically quantified by means of spatial wavelet analysis, demonstrating that spanwise deformations attain wider range of wavelengths than the respective streamwise rollers. Analysis of these results suggests that spanwise deformation is associated to both the incoming boundary layer and shear layer stability characteristics.en
dc.identifier.urihttp://dx.doi.org/10.1016/j.expthermflusci.2018.02.032
dc.identifier.urihttp://hdl.handle.net/10012/13073
dc.language.isoenen
dc.publisherElsevieren
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectLaminar separation bubbleen
dc.subjectLinear stability theoryen
dc.subjectPIVen
dc.subjectPODen
dc.titleSpanwise flow development within a laminar separation bubble under natural and forced transitionen
dc.typeArticleen
dcterms.bibliographicCitationMichelis, T., Kotsonis, M., & Yarusevych, S. (2018). Spanwise flow development within a laminar separation bubble under natural and forced transition. Experimental Thermal and Fluid Science, 96, 169–179. https://doi.org/10.1016/j.expthermflusci.2018.02.032en
uws.contributor.affiliation1Faculty of Engineeringen
uws.contributor.affiliation2Mechanical and Mechatronics Engineeringen
uws.peerReviewStatusRevieweden
uws.typeOfResourceTexten
uws.typeOfResourceTexten

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
1-s2.0-S0894177718303005-main.pdf
Size:
2.14 MB
Format:
Adobe Portable Document Format
Description:
Post-print

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
4.46 KB
Format:
Plain Text
Description: