Browsing Mechanical and Mechatronics Engineering by Subject "Recrystallization"
Now showing items 1-4 of 4
-
Effect of Forming Temperature and Sheet Temper on the Brazing Characteristics of Aluminum Alloy Sheet
(University of Waterloo, 2018-09-20)Automotive heat exchangers are fabricated by forming and brazing of multi-layered aluminum (Al) alloy sheets. The Al brazing sheets are comprised of two alloy layers: an AA3xxx core, which provides strength to the assembly, ... -
Experimental Analysis and Computational Modeling of Annealing in AA6xxx Alloys
(University of Waterloo, 2010-12-02)Microstructural evolution in a naturally-aged and cold-rolled AA6451 aluminum alloy during a non-isothermal annealing process, which leads to significant grain refinement, is investigated through: (a) conducting a comprehensive ... -
Microstructure, texture and mechanical behavior characterization of hot forged cast ZK60 magnesium alloy
(Elsevier, 2017-04-14)Uniaxial tension and compression tests were conducted to investigate the quasi-static performance of ZK60 Mg alloy in cast, followed by forging at optimum temperature of 450°C and a ram speed of 39mmmin-1. Microstructure ... -
Sagging resistance of warm formed aluminum brazing sheet
(Elsevier, 2018-04-01)Interrupted tensile tests, performed between room temperature (RT) and 250°C, were used to simulate warm forming of an AA3003/AA4045 brazing sheet. Brazing performance was predicted from sagging distance measurements after ...