Process Optimization of Robotic Laser Weld Brazing for AI-friendly Dataset Generation to Enable Smart Ultrasonic Inspection of Braze Joint Quality in Industry 4.0

dc.contributor.authorAkbarian, Shima
dc.contributor.authorScott, Ryan
dc.contributor.authorOuellete, Andrew
dc.contributor.authorSalandari-Rabori, Adib
dc.contributor.authorSarafan, Sheida
dc.contributor.authorWanjara, Priti
dc.contributor.authorGholipour, Javad
dc.contributor.authorHetrick, Elizabeth
dc.contributor.authorGhaffari, Bita
dc.contributor.authorMaev, Roman
dc.contributor.authorBiro, Elliot
dc.date.accessioned2026-11-20T14:07:04Z
dc.date.issued2027
dc.descriptionThe final publication is available at Elsevier via https://doi.org/10.1016/j.optlastec.2026.117033. © 2027. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
dc.description.abstractThis study establishes a custom-designed process window for a robotic laser weld brazing (LWB) process to control defects in braze seams used in automotive applications. This window is essential for producing braze seams of varying quality that meet custom specifications, enabling the development of an industrial-level ultrasonic testing (UT) defect detection system, with artificial intelligence (AI) automating UT data processing and measurement extraction. To obtain the required custom samples for training the AI model, a novel wire-adjusted heat input approach was defined, expounding a clear correlation between heat input and defect formation, unlike the traditional nominal heat input, which lacked consistency under varied wire feed speeds. This novel approach enabled precise delineation of heat input-related boundaries to distinguish defect-free conditions from those with lack of adhesion (LoA), pores, base metal melting (BMM), and non-conforming braze geometry. The process window was validated using micro-computed tomography (μCT) to scan and analyze defect distribution along the entire braze seam length. A semi-automated segmentation method was developed to facilitate statistical analysis of defect evolution, ensuring reliable classification of the defects. UT signatures for both defects and seam geometry were evaluated, and reliable signal feedback for defect detection was substantiated. A deep learning model, trained using μCT-derived ground truth, predicted seam geometry directly from UT data, achieving high alignment with μCT measurements across varied geometries and defects. The process window establishes the groundwork for both UT detection and AI-based geometry prediction, while extending AI-based detection to other defects warrants future investigation.
dc.description.sponsorshipThis research was funded by the National Research Council Canada as part of the Canada – Germany 3 + 2 Research Collaboration on Smart Solution for Quality Control of Vehicle Assembly using an Ultrasonic Imaging Sensor with Embedded Artificial Intelligence under Grant#NRC INT-018–1.
dc.identifier.uri10.1016/j.optlastec.2026.117033
dc.identifier.urihttps://hdl.handle.net/10012/24707
dc.language.isoen
dc.publisherElsevier
dc.relation.ispartofseriesOptics & Laser Technology; 5; 117033
dc.subjectlaser weld brazing
dc.subjectheat input
dc.subjectartificial intelligence
dc.subjectquality control
dc.subjectx-ray micro-ct
dc.subjectultrasonic testing
dc.titleProcess Optimization of Robotic Laser Weld Brazing for AI-friendly Dataset Generation to Enable Smart Ultrasonic Inspection of Braze Joint Quality in Industry 4.0
dc.typeArticle
dcterms.bibliographicCitationS. Akbarian, R. Scott, A. Ouellette, A. Salandari-Rabori, S. Sarafan, P. Wanjara, J. Gholipour, E. Hetrick, B. Ghaffari, R. Maev, E. Biro, Process optimization of robotic laser weld brazing for AI-friendly dataset generation to enable smart ultrasonic inspection of braze joint quality in Industry 4.0, Optics & Laser Technology, Volume 205, 2027, 117033, ISSN 0030-3992, https://doi.org/10.1016/j.optlastec.2026.117033.
uws.contributor.affiliation1Faculty of Engineering
uws.contributor.affiliation2Mechanical and Mechatronics Engineering
uws.peerReviewStatusReviewed
uws.scholarLevelGraduate
uws.typeOfResourceTexten

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Process Optimization of Robotic Laser Weld Brazing for AI-friendly Dataset.pdf
Size:
5.07 MB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
4.47 KB
Format:
Item-specific license agreed upon to submission
Description: