Continuous Modification of Polypropylene Via Photoinitiation
dc.contributor.author | Amintowlieh, Yasaman | |
dc.contributor.author | Tzoganakis, Costas | |
dc.contributor.author | Penlidis, Alexander | |
dc.date.accessioned | 2018-06-15T17:58:15Z | |
dc.date.available | 2018-06-15T17:58:15Z | |
dc.date.issued | 2015-07-03 | |
dc.description | This is the peer reviewed version of the following article: Amintowlieh, Y., Tzoganakis, C., & Penlidis, A. (n.d.). Continuous modification of polypropylene via photoinitiation. Polymer Engineering & Science, 55(10), 2423–2432 which has been published in final form at https://doi.org/10.1002/pen.24133 This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving. | en |
dc.description.abstract | A twin screw extruder was used for continuous modification of polypropylene (PP) via UV radiation. Long chain branches were incorporated in the PP backbone to modify its rheological properties. Benzophenone (BPH) as photoinitiator and trimethylolpropane triacrylate (TMPTA) as coagent were utilized during PP photomodification. Radiation was carried out after mixing in the extruder on solid stretched strands with approximately 0.3 mm thickness. The effects of photoinitiator concentration, radiation time and coagent presence were studied via a replicated two-level full factorial design of experiments. It was shown that photomodification of PP can be done continuously. Formation of long chain branches (LCBs) in the experimental runs was confirmed via rheological measurements. Gel content of the samples was also measured. It was found that long chain branches can be formed in PP with and without TMPTA at certain processing conditions. The amount of gel in the samples prepared with TMPTA was higher; however, the gel content could be controlled by manipulating BPH concentration and radiation time. | en |
dc.description.sponsorship | Natural Sciences and Engineering Research Council (NSERC) of Canada Canada Research Chair (CRC) program | en |
dc.identifier.uri | https://doi.org/10.1002/pen.24133 | |
dc.identifier.uri | http://hdl.handle.net/10012/13404 | |
dc.language.iso | en | en |
dc.publisher | Wiley | en |
dc.subject | polypropylene | en |
dc.subject | photoinitiation | en |
dc.subject | continuous modification | en |
dc.subject | reactive extrusion | en |
dc.subject | branching | en |
dc.title | Continuous Modification of Polypropylene Via Photoinitiation | en |
dc.type | Article | en |
dcterms.bibliographicCitation | Amintowlieh, Y., Tzoganakis, C., & Penlidis, A. (n.d.). Continuous modification of polypropylene via photoinitiation. Polymer Engineering & Science, 55(10), 2423–2432. https://doi.org/10.1002/pen.24133 | en |
uws.contributor.affiliation1 | Faculty of Engineering | en |
uws.contributor.affiliation2 | Chemical Engineering | en |
uws.peerReviewStatus | Reviewed | en |
uws.scholarLevel | Faculty | en |
uws.typeOfResource | Text | en |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- Amintowlieh et al Polym Eng Sci May 26 2015 (as accepted) UWSpace upload June 15 2018.pdf
- Size:
- 1.26 MB
- Format:
- Adobe Portable Document Format
- Description:
- Post-print
License bundle
1 - 1 of 1
No Thumbnail Available
- Name:
- license.txt
- Size:
- 6.08 KB
- Format:
- Item-specific license agreed upon to submission
- Description: