Browsing Waterloo Research by Subject "Fatigue modeling"

Now showing items 1-3 of 3

Anisotropy in the quasi-static and cyclic behavior of ZK60 extrusion: Characterization and fatigue modeling

Pahlevanpour, Amirhossein H.; Karparvarfard, Seyyed M. H.; Shaha, Sugrib K.; Behravesh, Seyed Behzad; Adibnazari, Saeed; Jahed, Hamid (Elsevier, 2018-12-15)

The quasi-static and strain-controlled fatigue characteristics of ZK60 extrusion have been investigated along three different directions: the extrusion direction (ED), the radial direction (RD), and 45° to the extrusion ...
Fatigue characterization and modeling of AZ31B magnesium alloy spot-welds

Behravesh, Seyed Behzad; Jahed, Hamid; Lambert, Steve (Elsevier, 2014-07-01)

Cyclic behavior of AZ31B spot-welds was studied using different specimen configurations, and compared with steel and aluminum spot-welds. Fatigue strength of magnesium spot-welds was similar to aluminum and less than steel. ...
Monotonic and cyclic behaviour of cast and cast-forged AZ80 Mg

Gryguc, Andrew; Shaha, Sugrib K.; Behravesh, Seyed Behzad; Jahed, Hamid; Wells, Mary; Williams, Bruce W.; Su, X. (Elsevier, 2017-11)

Tensile and strain-controlled fatigue tests were performed to investigate the influence of forging on the performance of cast AZ80 magnesium alloy. The obtained microstructural analysis showed that the as-cast AZ80 magnesium ...