Show simple item record

dc.contributor.authorHan, Yougun 17:11:55 (GMT) 17:11:55 (GMT)
dc.description.abstractDevelopment of new scientific disciplines such as bioengineering and micro-nano engineering adopting nonconventional materials requests innovative methodologies that can accurately measure the mechanical properties of soft biological materials and characterize surface energy and adhesion properties of them, independent of measurement conditions. One of emerging methods to measure the deformation of materials under stress is digital image correlation (DIC) technique. As a noncontact strain measurement method, DIC has the advantages of prevention of experimental errors caused by the use of contact type sensors and of flexibility in its application to soft materials that are hard to be tested by conventional method. In the first part of the thesis, 2 dimensional and 3 dimensional DIC codes were developed and optimized, and then applied to two critical applications: 1) determining the stress-strain behaviour of polydimethylsiloxane (PDMS) sample, as a model soft material, using the optical images across large deformation region, and 2) detecting the stiffness variation within the gel mimicking the breast tumour using ultrasound images. The results of this study showed the capability of DIC as a strain sensor and suggested its potential as a diagnosing tool for the malignant lesion causing local stiffness variation. In the characterization of surface energy and adhesion properties of materials, two most common methods are contact angle measurement and JKR-type indentation test. In the second part of the thesis, the experimental set-up for these methods were developed and verified by using the PDMS in static (quasi equilibrium) state. From the dynamic tests, it showed its possible usage in studying adhesion hysteresis with respect to speed. The adhesion hysteresis was observed at high speed condition in both contact angle measurement and JKR-type indentation tests.en
dc.publisherUniversity of Waterlooen
dc.subjectDigital image correlationen
dc.subjectStress-strain curveen
dc.subjectSurface energyen
dc.subjectJKR theoryen
dc.subjectContact angleen
dc.titleDevelopment of Methodologies for Strain Measurement and Surface Energy Characterizationen
dc.typeMaster Thesisen
dc.subject.programMechanical Engineeringen and Mechatronics Engineeringen
uws-etd.degreeMaster of Applied Scienceen

Files in this item


This item appears in the following Collection(s)

Show simple item record


University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages