A New Crystal Plasticity-based Modeling of Damage Evolution in Advanced High Strength Steels under Varying Strain Rates, Temperatures, and Loading Conditions
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
University of Waterloo
Abstract
This thesis develops a crystal plasticity-based damage modeling framework for high-strength low-alloy (HSLA) steels and multiphase advanced high-strength steels (AHSS) to predict damage evolution, stress-strain softening, and failure over a range of strain rates, temperatures, and loading conditions. A thermodynamically consistent rate-dependent formulation is first developed for HSLA steels. In this baseline model, crystallographic slip, dislocation evolution, internal temperature rise, void nucleation, and void growth are coupled through thermodynamic driving forces and rate-dependent kinetic laws. Damage is introduced as an evolving internal variable that contributes to volumetric deformation, stiffness degradation, and the progressive loss of load-carrying capacity. The model is implemented in a Taylor-type crystal plasticity framework and calibrated using experimental characterization performed in this work on HR340 and HR550 steels, including tensile testing over quasi-static and intermediate strain rates, electron backscatter diffraction (EBSD) measurements for the initial texture, and high-speed infrared thermography for temperature evolution during deformation. Numerical predictions are compared against measured stress-strain curves, temperature histories, and texture evolution. The calibrated model captures the rate-dependent stress-strain response, temperature rise, damage accumulation, and post-necking softening behavior of the investigated HSLA steels.
The modeling strategy is then extended to multiphase AHSS with increasing microstructural complexity. For dual phase steels, the formulation incorporates phase specific ferrite and martensite plasticity, microstructure-sensitive void evolution, texture effects, and homogenized ferrite-martensite interface degradation. The model is evaluated for DP590 and DP780 steels under uniaxial tension, plane strain tension, and simple shear loading, allowing the influence of phase contrast, loading path, crystallographic texture, and interface-sensitive damage on failure response to be examined without explicitly meshing phase boundaries. For quenching and partitioning steels, the framework is adapted to account for evolving phase constitution by coupling crystallographic slip, retained-austenite transformation, thermomechanical effects, and phase-sensitive damage evolution. The Q&P model is applied to QP3Mn and QP980 steels to capture retained-austenite transformation, thermomechanical effects, damage-driven softening, and failure under different strain rate and temperature conditions. A transition strain analysis is introduced to distinguish the onset of macroscopic softening, rapid damage acceleration, and the shift from retained-austenite-assisted stabilization to damage-dominated degradation. By treating HSLA, DP, and Q&P steels as nested levels of one state-variable framework, the thesis addresses whether the most enriched transformation- and damage-coupled law can reduce to the behavior of simpler alloys when inactive mechanisms are suppressed, rather than whether one empirical damage law can simply be recalibrated for every grade. The results demonstrate that predictive modeling of damage-driven softening requires a hierarchy of active mechanisms: void evolution for HSLA steels, phase/interface damage for DP steels, and retained-austenite transformation with phase-sensitive damage for Q&P steels. The proposed framework provides an efficient, microstructure-sensitive constitutive description linking crystallographic deformation, thermomechanical coupling, phase interaction, retained-austenite transformation, and damage evolution to the progressive failure response of high-strength automotive steels.