Show simple item record

dc.contributor.authorSood, Sumit
dc.contributor.authorDuvedi, Ravinder Kumar
dc.contributor.authorBedi, Sanjeev
dc.contributor.authorMann, Stephen
dc.date.accessioned2018-08-13 19:25:51 (GMT)
dc.date.available2018-08-13 19:25:51 (GMT)
dc.date.issued2018-01-01
dc.identifier.urihttps://dx.doi.org/10.1016/j.promfg.2018.07.001
dc.identifier.urihttp://hdl.handle.net/10012/13577
dc.descriptionFirst published by Elsevier, https://dx.doi.org/10.1016/j.promfg.2018.07.001 © 2018. This open-access article is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/en
dc.description.abstractIn this paper a new paradigm for CNC carving of digital images in the form of lookalike three-dimensional (3D) surfaces on wooden or metallic plaques is discussed. This work is focused on development of a single page windows based console application for conversion of a two-dimensional (2D) digital image into a 3D freeform surface representation in the form of a point cloud data and STL format. Subsequently, the 3D surface data is then used for generating an efficient toolpath data for 3-axis CNC finish machining using a ball end mill tool. The results from the developed algorithm are validated using a machining simulation in the virtual environment of an Open-GL based 3D graphical simulator ToolSim [1].en
dc.language.isoenen
dc.publisherElsevieren
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subject2D imageen
dc.subject3D surfaceen
dc.subjectCNC Machiningen
dc.subjectPoint cloud dataen
dc.subjectSTLen
dc.subjectToolpathen
dc.title3D representation and CNC machining of 2D digital imagesen
dc.typeArticleen
dcterms.bibliographicCitationSood, S., Duvedi, R. K., Bedi, S., & Mann, S. (2018). 3D representation and CNC machining of 2D digital images. Procedia Manufacturing, 26, 10–20. doi:10.1016/j.promfg.2018.07.001en
uws.contributor.affiliation1Faculty of Engineeringen
uws.contributor.affiliation1Faculty of Mathematicsen
uws.contributor.affiliation2Mechanical and Mechatronics Engineeringen
uws.contributor.affiliation2David R. Cheriton School of Computer Scienceen
uws.typeOfResourceTexten
uws.typeOfResourceTexten
uws.peerReviewStatusRevieweden
uws.scholarLevelFacultyen


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 International
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International

UWSpace

University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages