Show simple item record

dc.contributor.authorJalali, Kiumars
dc.contributor.authorUchida, Thomas
dc.contributor.authorLambert, Steve
dc.contributor.authorMcPhee, John 18:53:06 (GMT) 18:53:06 (GMT)
dc.descriptionReplicated with permission by SAE Copyright © 2017 SAE International. Further distribution of this material is not permitted without prior permission from SAE.en
dc.description.abstractA two-passenger, all-wheel-drive urban electric vehicle (AUTO21EV) with four direct-drive in-wheel motors has been designed and developed at the University of Waterloo. A 14-degree-of-freedom model of this vehicle has been used to develop a genetic fuzzy yaw moment controller. The genetic fuzzy yaw moment controller determines the corrective yaw moment that is required to stabilize the vehicle, and applies a virtual yaw moment around the vertical axis of the vehicle. In this work, an advanced torque vectoring controller is developed, the objective of which is to generate the required corrective yaw moment through the torque intervention of the individual in-wheel motors, stabilizing the vehicle during both normal and emergency driving maneuvers. Novel algorithms are developed for the left-to-right torque vectoring control on each axle and for the front-to-rear torque vectoring distribution action. Several maneuvers are simulated to demonstrate the performance and effectiveness of the proposed advanced torque vectoring controller, and the results are compared to those obtained using the ideal genetic fuzzy yaw moment controller. The advanced torque vectoring controller is also implemented in a hardware- and operator-in-the-loop driving simulator to further evaluate its performance.en
dc.description.sponsorshipFunding for this work was provided by the Natural Sciences and Engineering Research Council of Canada and agrant from AUTO21, a Canadian Network of Centres of Excellenceen
dc.publisherSAE Internationalen
dc.titleDevelopment of an Advanced Torque Vectoring Control System for an Electric Vehicle with In-Wheel Motors using Soft Computing Techniquesen
dcterms.bibliographicCitationJalali, K., Uchida, T., McPhee, J., & Lambert, S. (2013). Development of an Integrated Control Strategy Consisting of an Advanced Torque Vectoring Controller and a Genetic Fuzzy Active Steering Controller. SAE International Journal of Passenger Cars - Electronic and Electrical Systems, 6(1), 222–240.
uws.contributor.affiliation1Faculty of Engineeringen
uws.contributor.affiliation2Systems Design Engineeringen

Files in this item


This item appears in the following Collection(s)

Show simple item record


University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages