Show simple item record

dc.contributor.authorDeng, Henghuaen 13:49:33 (GMT) 13:49:33 (GMT)
dc.description.abstractAs optical fiber systems evolve to higher data rates, the importance of polarization control and manipulation steadily increases. Polarization manipulating devices, such as polarization splitters and converters, can be realized by introducing material anisotropy or geometric asymmetry. Compared to active devices, passive polarization converters are more simply fabricated and controlled; therefore they have attracted increasing attention during the past two decades. However, materials employed in previous polarization rotating waveguides are mainly limited to low index-contrast III-V semiconductors such as InP and GaAs. Such III-V devices possess large radiation loss, large curvature loss, and low coupling efficiency to single-mode fibers; in addition, due to the weak optical confinement, the device spacing has to be large, which prevents high-density and large-scale integration in optoelectronic integrated circuits (OEIC) and planar lightwave circuits (PLC). <br /><br /> In this dissertation, the silicon-on-insulator (SOI) technology is introduced to the design and fabrication of passive polarization rotators (PR). Efficient and accurate full-vectorial finite-element eigenmode solvers as well as propagation schemes for characterizing novel SOI PRs are developed because commercial software packages based on finite-difference techniques are inefficient in dealing with arbitrary waveguide geometries. <br /><br /> A set of general design procedures are accordingly developed to design a series of slanted-angle polarization converters, regardless of the material system (SOI or III-V), outer-slab layer configuration (symmetric or asymmetric), and longitudinal loading (single- or multi-section). In particular, our normalized design charts and simple empirical formula for SOI polarization converters are applicable to a wide range of silicon-guiding-film thickness, e. g. , from 1 to 30 &mu;m, enabling fast and accurate polarization rotator design on most commercial SOI wafers. With these procedures, in principle 100% polarization conversion efficiency can be achieved by optimizing waveguide geometric parameters. <br /><br /> A novel configuration with asymmetric external waveguiding layers is proposed, which is advantageous for fabrication procedure, manufacturing tolerance, single-mode region, and conversion efficiency. By etching along the crystallographic plane, the angled-facet can be perfectly fabricated. Completely removing external waveguiding layer beside the sloped sidewall not only simplifies production procedures but also enhances fabrication tolerances. <br /><br /> To accurately and efficiently characterize asymmetric slanted-angle SOI polarization converters, adaptive mesh generation procedures are incorporated into our finite-element method (FEM) analysis. In addition, anisotropic perfectly-matched-layer (PML) boundary condition (BC) is employed in the beam propagation method (BPM) in order to effectively suppress reflections from the edges of the computation window. For the BPM algorithm, the power conservation is strictly monitored, the non-unitarity is thoroughly analyzed, and the inherent numerical dissipation is reduced by adopting the quasi-Crank-Nicholson scheme and adaptive complex reference index. <br /><br /> Advantages of SOI polarization rotators over III-V counterparts are studied through comprehensive research on power exchange, single-mode condition, fabrication tolerance, wavelength stability, bending characteristics, loss and coupling properties. The performance of SOI PRs is stable for wavelengths in the ITU-T <em>C</em>-band and <em>L</em>-band, making such devices quite suitable for DWDM applications. Due to the flexible cross-section of SOI polarization converters, the coupling loss to laser diodes and single mode fibers (SMF) can be designed to be very small and can be further reduced by a tapered waveguide with cross-sections always satisfying the single-mode criteria. Slanted-angle SOI polarization rotators display asymmetric bending characteristics and permit extremely small curvatures with negligible radiation loss when the angled-facet is located at the outer bend radius. Moreover, SOI polarization rotators can be manufactured with low-price processing techniques that are fully compatible with CMOS integrated circuits (IC) technology, and thus can be integrated on both photonic and electronic chips. <br /><br /> Experimental verifications have shown good agreement with theoretical analysis and have confirmed the promising characteristics of our novel asymmetric SOI polarization converters. Similar asymmetric-outer-slab geometry has recently been employed by peer researchers to fabricate high performance III-V polarization rotators. We therefore believe that results in this dissertation will contribute much to related research fields.en
dc.format.extent4715602 bytes
dc.publisherUniversity of Waterlooen
dc.rightsCopyright: 2005, Deng, Henghua. All rights reserved.en
dc.subjectElectrical & Computer Engineeringen
dc.titleDesign and Characterization of Silicon-on-Insulator Passive Polarization Converter with Finite-Element Analysisen
dc.typeDoctoral Thesisen
dc.pendingfalseen and Computer Engineeringen
uws-etd.degreeDoctor of Philosophyen

Files in this item


This item appears in the following Collection(s)

Show simple item record


University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages