Show simple item record

dc.contributor.authorNejadmalayeri, Amir Hosseinen 14:01:44 (GMT) 14:01:44 (GMT)
dc.description.abstractCDMA channel selection requires sharp as well as wide-band Filtering. SAW Filters which have been used for this purpose are only available in IF range. In direct conversion receivers this has to be done at low frequencies. Switched Capacitor technique has been employed to design a low power, highly selective low-pass channel select Filter for CDMA wireless receivers. The topology which has been chosen ensures the low sensitivity of the Filter response. The circuit has been designed in a mixed-mode 0. 18u CMOS technology working with a single supply of 1. 8 V while its current consumption is less than 10 mA.en
dc.format.extent1219134 bytes
dc.publisherUniversity of Waterlooen
dc.rightsCopyright: 2001, Nejadmalayeri, Amir Hossein. All rights reserved.en
dc.subjectElectrical & Computer Engineeringen
dc.subjectSwitched Capacitor Filteren
dc.subjectCDMA Wireless Receiveren
dc.subjectChannel Selectionen
dc.subjectLow-Voltage and Low-Power Designen
dc.subjectFully Differentialen
dc.subjectNoise and Sensitivity Analysisen
dc.titleCDMA Channel Selection Using Switched Capacitor Techniqueen
dc.typeMaster Thesisen
dc.pendingfalseen and Computer Engineeringen
uws-etd.degreeMaster of Applied Scienceen

Files in this item


This item appears in the following Collection(s)

Show simple item record


University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages