Modelling TCE Contaminant Transport in Fractured Bedrock and Evaluating Bedrock Vapour Extraction using CompFlow BioF at CTL-III, Santa Susana Field Laboratory
Loading...
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
University of Waterloo
Abstract
Numerical simulation of contaminant transport and remediation in fractured bedrock remains a significant challenge due to strong geological heterogeneity, multiphase flow behavior, and uncertainty in subsurface properties. Chlorinated solvents such as trichloroethylene (TCE) are particularly problematic in these environments, as fracture-controlled flow can accelerate migration and mass stored in the matrix between the fractures complicates remediation efforts.
The primary aim of this research is to simulate a real bedrock vapour extraction (BVE) pilot test. TCE transport and vapour-phase remediation in fractured bedrock at the Santa Susana Field Laboratory (SSFL), California, are modeled using the multiphase, multicomponent numerical simulator CompFlow BioF. The modeling framework incorporates: discrete fracture representations; capillary pressure and relative permeability relationships for the mobile aqueous, gas and non-aqueous phases; and, equilibrium phase partitioning between the aqueous, gas and non-aqueous phases to capture key processes governing contaminant behavior in the vadose zone. Site-specific geological conditions and operational parameters from the field-scale BVE test were used to configure the numerical domain, enabling simulation of both contaminant phase and mass distributions evolution and active remediation scenarios.
Simulation results were compared with field observations to evaluate the model’s ability to reproduce observed contaminant distributions and subsurface moisture conditions. The comparison demonstrates that the model captures lateral and vertical variability in TCE occurrence and water content across multiple monitoring locations, as well as long-term changes in contaminant phase distribution. These findings provide confidence in the model’s representation of fracture–matrix interactions and multiphase flow and transport processes in unsaturated fractured bedrock.
Overall, it demonstrates the value of integrating numerical modeling with field-scale pilot testing, both informed at the process scale to improve conceptual understanding of fractured bedrock systems and to support the design and evaluation of remediation technology effectiveness from a time and cost perspective for chlorinated solvent contamination.