Show simple item record

dc.contributor.authorRushton, Mitchell
dc.date.accessioned2022-05-16 15:56:04 (GMT)
dc.date.available2022-05-16 15:56:04 (GMT)
dc.date.issued2022-05-16
dc.date.submitted2022-04-14
dc.identifier.urihttp://hdl.handle.net/10012/18275
dc.description.abstractCable-driven parallel robots (CDPR) are a special class of robotic manipulators consisting of a rigid end effector suspended, constrained, and actuated by a number of length-varying cables. Since cable mass is typically negligible, it allows CDPRs to be built with extremely low-inertia, enabling high-accelerations and the ability to span distances that would otherwise be impossible using rigid structures. Where CDPRs suffer is their inability to perform in cluttered installation spaces due to the need to avoid collisions between cables and the environment. This thesis proposes a design alternative defined as `variable-structure CDPRs' (VSCR) to address the inherent limitations CDPRs have regarding their limited usable workspaces in cluttered environments. What makes VSCRs unique is their ability to instantaneously alter their dynamic structure through collisions between cables and objects fixed in the environment. It is shown that, unlike traditional CDPRs, VSCRs are able to produce non-convex reachable workspaces: a property that is especially useful for circumventing obstacles and has implications for a wide range of applications such as rehabilitation, agriculture, and warehousing. An extended cable model for representing collidable cables is developed along with a corresponding inverse kinematics method as a foundation for initiating the study of VSCRs. Next, an atlas-based approach for representing VSCR configuration spaces is introduced, along with a method for its computation. The proposed representation, referred to as the `structure atlas,' is shown to be a powerful tool for performing VSCR workspace analysis and inverse kinematics. Finally, an experimental testbed is constructed and used for conducting several experimental studies to validate the previously mentioned theoretical contributions and observe the real-world capabilities of VSCRs. Mathematically and experimentally, it is shown that VSCRs dramatically improve the reachability and accessible workspaces CDPRs can achieve in cluttered or irregular environments.en
dc.language.isoenen
dc.publisherUniversity of Waterlooen
dc.subjectcollision avoidanceen
dc.subjectcable-driven parallel robotsen
dc.subjectvariable-structureen
dc.subjectroboticsen
dc.subjectkinematicsen
dc.titleVariable-Structure Cable-Driven Parallel Robotsen
dc.typeDoctoral Thesisen
dc.pendingfalse
uws-etd.degree.departmentMechanical and Mechatronics Engineeringen
uws-etd.degree.disciplineMechanical Engineeringen
uws-etd.degree.grantorUniversity of Waterlooen
uws-etd.degreeDoctor of Philosophyen
uws-etd.embargo.terms0en
uws.contributor.advisorKhajepour, Amir
uws.contributor.affiliation1Faculty of Engineeringen
uws.published.cityWaterlooen
uws.published.countryCanadaen
uws.published.provinceOntarioen
uws.typeOfResourceTexten
uws.peerReviewStatusUnrevieweden
uws.scholarLevelGraduateen


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record


UWSpace

University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages