Show simple item record

dc.contributor.authorNadeem, Muhammaden
dc.date.accessioned2006-08-22 14:37:11 (GMT)
dc.date.available2006-08-22 14:37:11 (GMT)
dc.date.issued2005en
dc.date.submitted2005en
dc.identifier.urihttp://hdl.handle.net/10012/1254
dc.description.abstractDeep slurry injection is a process of solid waste disposal that involves grinding the solid waste to a relatively fine-grained consistency, mixing the ground waste with water and/or other liquids to form slurry, and disposing of the slurry by pumping it down a well at a high enough pressure that fractures are created within the target formation. This thesis describes the site assessment criteria involved in selecting a suitable target reservoir for deep slurry injection. The main goals of this study are the follows: <ul> <li>Identify the geological parameters important for a prospective injection site</li> <li>Recognize the role of each parameter</li> <li>Determine the relationships among different parameters</li> <li>Design and develop a model which can assemble all the parameters into a semi-quantitative evaluation process that could allow site ranking and elimination of sites that are not suitable</li> <li>Evaluate the model against several real slurry injection cases and several prospective cases where slurry injection may take place in future</li> </ul> The quantitative and qualitative parameters that are recognized as important for making a decision regarding a target reservoir for deep slurry injection operations are permeability, porosity, depth, areal extent, thickness, mechanical strength, and compressibility of a reservoir; thickness and flow properties of the cap rock; geographical distance between an injection well and a waste source or collection centre; and, regional and detailed structural and tectonic setup of an area. Additional factors affecting the security level of a site include the details of the lithostratigraphic column overlying the target reservoir and the presence of overlying fracture blunting horizons. Each parameter is discussed in detail to determine its role in site assessment and also its relationship with other parameters. A geological assessment model is developed and is divided into two components; a decision tree and a numerical calculation system. The decision tree deals with the most critical parameters, those that render a site unsuitable or suitable, but of unspecified quality. The numerical calculation gives a score to a prospective injection site based on the rank numbers and weighting factors for the various parameters. The score for a particular site shows its favourability for the injection operation, and allows a direct comparison with other available sites. Three categories have been defined for this purpose, i. e. average, below average, and above average. A score range of 85 to 99 of 125 places a site in the ?average? category; a site will be unsuitable for injection if it belongs to the ?below average? category, i. e. if the total score is less than 85, and the best sites will generally have scores that are in the ?above average? category, with a score of 100 or higher. One may assume that for sites that fall in the ?average? category there will have to be more detailed tests and assessments. The geological assessment model is evaluated using original geological data from North America and Indonesia for sites that already have undergone deep slurry injection operations and also for some possible prospective sites. The results obtained from the model are satisfactory as they are in agreement with the empirical observations. Areas for future work consist of the writing of a computer program for the geological model, and further evaluation of the model using original data from more areas representing more diverse geology from around the world.en
dc.formatapplication/pdfen
dc.format.extent1905187 bytes
dc.format.mimetypeapplication/pdf
dc.language.isoenen
dc.publisherUniversity of Waterlooen
dc.rightsCopyright: 2005, Nadeem, Muhammad. All rights reserved.en
dc.subjectEarth Sciencesen
dc.subjectEnvironmental Studiesen
dc.subjectSlurry injectionen
dc.subjectsolid waste disposalen
dc.subjecthydraulic fracturingen
dc.subjectsite identificationen
dc.subjectsite assessment criteriaen
dc.subjecttarget reservoiren
dc.subjectdecision treeen
dc.subjectgeological assessment modelen
dc.titleReservoir screening criteria for deep slurry injectionen
dc.typeMaster Thesisen
dc.pendingfalseen
uws-etd.degree.departmentEarth Sciencesen
uws-etd.degreeMaster of Scienceen
uws.typeOfResourceTexten
uws.peerReviewStatusUnrevieweden
uws.scholarLevelGraduateen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record


UWSpace

University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages