Now showing items 1-20 of 7158

    • 0.42 THz Transmitter with Dielectric Resonator Array Antenna 

      Holisaz, Hamed (University of Waterloo, 2019-07-23)
      Off chip antennas do not occupy the expensive die area, as there is no limitation on their building material, and can be built in any size and shape to match the system requirements, which are all in contrast to on-chip ...
    • 17-21 GHz Low-Noise Amplifier with Embedded Interference Rejection 

      Jodhka, Tejasvi (University of Waterloo, 2023-01-06)
      The ever-growing demand for high performance wireless connectivity has led to the development of fifth-generation (5G) wireless communication standards as well as satellite communication (Satcom). Both 5G wireless ...
    • 22-32 GHz Low-Noise Amplifier Design in 22-nm CMOS-SOI Technology 

      Cui, Bolun (University of Waterloo, 2019-01-29)
      This thesis explores the use of a 22-nm CMOS-SOI technology in the design of a two-stage amplifier which targets wide bandwidth, low noise and modest linearity in the 28 GHz band. A design methodology with a ...
    • 27 Stories 

      Smith, Laura (University of Waterloo, 2010-05-20)
      Invisible Cities is Italo Calvino’s description, in fifty-five stories of fifty-five cities, of the travels of Marco Polo. Each city is fictitious, but collectively they make up Marco Polo’s Venice. A city is distinct; ...
    • 2D Digital Filter Implementation on a FPGA 

      Tsuei, Danny Teng-Hsiang (University of Waterloo, 2011-08-31)
      The use of two dimensional (2D) digital filters for real-time 2D data processing has found important practical applications in many areas, such as aerial surveillance, satellite imaging and pattern recognition. In the ...
    • 2D Material Based PTE Detectors with Room Temperature Operations 

      Xie, Zhemiao (University of Waterloo, 2023-12-21)
      Real-time, room-temperature operation and self-powered photothermoelectric (PTE) detection emeries are advanced and versatile solutions for various applications. These detectors offer the advantage of not requiring external ...
    • 36 Stratagems Towards a People's Modernity 

      Chau, Tammy Sau-Lyn (University of Waterloo, 2009-09-17)
      The design thesis is sited along the Shanghai Bund in China. It pursues an alternative modernity that is quintessentially Chinese by developing a design approach specific to the local imperatives and the contextual condition. ...
    • A 37-40 GHz Dual-Polarized 16-Element Phased-Array Antenna with Near-Field Probes 

      He, Ziran (University of Waterloo, 2022-09-21)
      With the development of fifth-generation (5G) communication networks, in order to meet the growing demand for high-speed and low-latency wireless communication services, channel capacity has become the main driving force ...
    • The 38th Parallel: Penetrating the Line 

      Oh, Juhee (University of Waterloo, 2007-09-20)
      In July 1953, the armistice ended the Korean War that lasted for three years and established the Demilitarized Zone on either side of the demarcation line as a buffer between the two countries to prevent further military ...
    • A 39GHz Balanced Power Amplifier with Enhanced Linearity in 45 nm SOI CMOS 

      Ma, Haien (University of Waterloo, 2022-09-20)
      With the high data rate communication systems that come with fifth-generation (5G) mobile networks, the shift of operation to millimeter-wave frequency becomes inevitable. The expected data rate in 5G is significantly ...
    • 3D bioprinting of liver-mimetic construct with alginate/cellulose nanocrystal hybrid bioink 

      Wu, Yun; Lin, Zhi Yuan (William); Wenger, Andrew; Tam, Kam C.; Tang, Xiaowu (Shirley) (Elsevier, 2018-03-01)
      3D bioprinting is a novel platform for engineering complex, three-dimensional (3D) tissues that mimic real ones. The development of hybrid bioinks is a viable strategy that integrates the desirable properties of the ...
    • A 3D ellipsoidal volumetric foot–ground contact model for forward dynamics 

      Brown, Peter; McPhee, John (Springer, 2018-04-01)
      Foot–ground contact models are an important part of forward dynamic biomechanic models, particularly those used to model gait, and have many challenges associated with them. Contact models can dramatically increase the ...
    • 3D Ground Truth Generation Using Pre-Trained Deep Neural Networks 

      Lee, Jungwook (University of Waterloo, 2019-05-24)
      Training 3D object detectors on publicly available data has been limited to small datasets due to the large amount of effort required to generate annotations. The difficulty of labeling in 3D using 2.5D sensors, such as ...
    • 3D MEMS Microassembly 

      Do, Chau (University of Waterloo, 2008-09-03)
      Due to the potential uses and advantages of 3D microelectromechanical systems (MEMS), research has been ongoing to advance the field. The intention of my reasearch is to explore different gripper designs and their ...
    • 3D Mesh and Pose Recovery of a Foot from Single Image 

      Boismenu-Quenneville, Frédéric (University of Waterloo, 2022-01-18)
      The pandemic and the major shift to online shopping has highlighted the current difficulties in getting proper sizing for clothing and shoes. Being able to accurately measure shoes using readily available smartphones would ...
    • 3D Motion Planning using Kinodynamically Feasible Motion Primitives in Unknown Environments 

      Chen, Peiyi (University of Waterloo, 2011-09-01)
      Autonomous vehicles are a great asset to society by helping perform many dangerous or tedious tasks. They have already been successfully employed for many practical applications, such as search and rescue, automated ...
    • 3D N-doped hybrid architectures assembled from 0D T-Nb2O5 embedded in carbon microtubes toward high-rate Li-ion capacitors 

      Tolami Hemmati, Sahar; Li, Ge; Wang, Xiaolei; Ding, Yuanli; Pei, Yu; Yu, Aiping; Chen, Zhongwei (Elsevier, 2019-02)
      Herein, a unique nitrogen-doped T-Nb2O5/tubular carbon hybrid structure in which T-Nb2O5 nanoparticles are homogeneously embedded in an in-situ formed nitrogen-doped microtubular carbon is synthesized, utilizing a facile ...
    • 3D optical metrology by digital moiré: Pixel-wise calibration refinement, grid removal, and temporal phase unwrapping 

      Mohammadi, Fatemeh (University of Waterloo, 2017-01-24)
      Fast, accurate three dimensional (3D) optical metrology has diverse applications in object and environment modelling. Structured-lighting techniques allow non-contacting 3D surface-shape measurement by projecting patterns ...
    • 3D Shape Reconstruction of Knee Bones from Low Radiation X-ray Images Using Deep Learning 

      Hampali, Shamanth (University of Waterloo, 2021-06-02)
      Understanding the bone kinematics of the human knee during dynamic motions is necessary to evaluate the pathological conditions, design knee prosthesis, orthosis and surgical treatments such as knee arthroplasty. Also, ...
    • 3D Silicone Whipping Additive Manufacturing (SWAM): Technology, Applications, and Research Needs. 

      Saggu, Gurkamal (University of Waterloo, 2022-01-20)
      Additive manufacturing has become increasingly popular and is developing in many technologies. This thesis focusses on the additive manufacturing with paste technology, more specifically the goal is to further develop a ...

      UWSpace

      University of Waterloo Library
      200 University Avenue West
      Waterloo, Ontario, Canada N2L 3G1
      519 888 4883

      All items in UWSpace are protected by copyright, with all rights reserved.

      DSpace software

      Service outages