Show simple item record

dc.contributor.authorScorah, Matthewen 13:58:50 (GMT) 13:58:50 (GMT)
dc.description.abstractAn experimental and modelling investigation of a tetrafunctional initiator designed for free radical polymerizations is presented. Multifunctional initiators are believed to provide two advantages over traditional monofunctional initiators. With a higher number of functional sites per molecule, they are able to increase polymer production while simultaneously maintaining or increasing polymer molecular weight. Examination of the literature indicates the majority of academic and industrial published studies have investigated difunctional initiators with most focusing on styrene. In this thesis, a tetrafunctional initiator, JWEB50, was systematically investigated for a variety of monomer systems in order to develop a better understanding of the behaviour of multifunctional initiators in free radical polymerizations. <br /><br /> A kinetic study comparing the tetrafunctional initiator to a monofunctional counterpart, TBEC, demonstrated that the impact of a multifunctional initiator is dependent upon monomer type. Regardless of the homo- or copolymer system examined, it was observed that the tetrafunctional initiator could produce higher rates of polymerization due to the greater number of labile groups per initiator molecule. However, the influence of the tetrafunctional initiator on the polymer molecular weight was dictated by the polymerization characteristics of the system in question. In the case of styrene, the tetrafunctional initiator maintained similar molecular weights compared to the monofunctional initiator while for methyl methacrylate (MMA), switching from a mono- to a tetrafunctional initiator actually decreased the polymer molecular weight. Other monomers such as butyl acrylate and vinyl acetate and copolymers of MMA and styrene or alpha-methyl styrene were examined to study the effect of initiator functionality in free radical polymerizations. <br /><br /> Subsequent to the kinetic investigation, polystyrene and poly(methyl methacrylate) samples produced with the tetrafunctional initiator were characterized in detail in order to examine the effects of initiator functionality on polymer properties. Samples generated with the monofunctional initiator were used for comparison purposes. Chromatographic and dilute solution methods were able to detect significant levels of branching in the polystyrene sample produced with JWEB50, while poly(methyl methacrylate) samples showed no evidence of branching. Rheological tests involving a combination of oscillatory and creep shear measurements were completed in order to detect differences between samples. The presence of branching using rheological techniques was clearly observed for both polystyrene and poly(methyl methacrylate) samples produced with the tetrafunctional initiator. <br /><br /> In order to explain the experimental results observed in the kinetic and polymer properties studies, a reaction mechanism for polymerizations initiated with a tetrafunctional initiator was proposed and used in the development of a mathematical model. Reactions involving the fate/efficiency of functional groups are properly accounted for, while in the past this had been ignored by modelling work in the literature. Based on model predictions, di-radical concentrations were estimated to be several orders of magnitude smaller than mono-radical concentrations and their contribution in the reaction mechanism was found to be negligible. Modelling results also demonstrated that the concentration and chain length of various polymer structures (i. e. , linear, star or coupled stars) depend upon monomer type and reaction conditions.en
dc.format.extent2673936 bytes
dc.publisherUniversity of Waterlooen
dc.rightsCopyright: 2005, Scorah, Matthew. All rights reserved.en
dc.subjectChemical Engineeringen
dc.subjectfree radical polymerizationen
dc.subjecttetrafunctional initiatoren
dc.subjectmathematical modellingen
dc.subjectpoly(methyl methacrylate)en
dc.subjectkinetic investigationen
dc.subjectpolymer characterizationen
dc.titleExperimental and Modelling Investigation of a Novel Tetrafunctional Initiator in Free Radical Polymerizationen
dc.typeDoctoral Thesisen
dc.pendingfalseen Engineeringen
uws-etd.degreeDoctor of Philosophyen

Files in this item


This item appears in the following Collection(s)

Show simple item record


University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages