Show simple item record

dc.contributor.authorAyoub, Ahmed 18:13:22 (GMT) 18:13:22 (GMT)
dc.description.abstractDue to the rapid growth of using Internet of Things (IoT) devices in daily life, the need to achieve an acceptable level of security and privacy for these devices is rising. Security risks may include privacy threats like gaining sensitive information from a device, and authentication problems from counterfeit or cloned devices. It is more challenging to add security features to extremely constrained devices, such as passive Electronic Product Code (EPC) Radio Frequency Identification (RFID) tags, compared to devices that have more computational and storage capabilities. EPC RFID tags are simple and low-cost electronic circuits that are commonly used in supply chains, retail stores, and other applications to identify physical objects. Most tags today are simple "license plates" that just identify the object they are attached to and have minimal security. Due to the security risks of new applications, there is an important need to implement secure RFID tags. Examples of the security risks for these applications include unauthorized physical tracking and inventorying of tags. The current commercial RFID tag designs use specialised hardware circuits approach. This approach can achieve the lowest area and power consumption; however, it lacks flexibility. This thesis presents an optimized application-specific instruction set architecture (ISA) for an ultralight Hardware Security Module (HSM). HSMs are computing devices that protect cryptographic keys and operations for a device. The HSM combines all security-related functions for passive RFID tag. The goal of this research is to demonstrate that using an application-specific instruction set processor (ASIP) architecture for ultralight HSMs provides benefits in terms of trade-offs between flexibility, extensibility, and efficiency. Our novel application specific instruction-set architecture allows flexibility on many design levels and achieves acceptable security level for passive EPC RFID tag. Our solution moves a major design effort from hardware to software, which largely reduces the final unit cost. Our ASIP processor can be implemented with 4,662 gate equivalent units (GEs) for 65 nm CMOS technology excluding cryptographic units and memories. We integrated and analysed four cryptographic modules: AES and Simeck block ciphers, WG-5 stream cipher, and ACE authenticated encryption module. Our HSM achieves very good efficiencies for both block and stream ciphers. Specifically for the AES cipher, we improve over a previous programmable AES implementation result by 32x. We increase performance dramatically and increase/decrease area by 17.97/17.14% respectively. These results fulfill the requirements of extremely constrained devices and allow the inclusion of cryptographic units into the datapath of our ASIP processor.en
dc.publisherUniversity of Waterlooen
dc.subjectLightweight Cryptographyen
dc.subjectComputer Hardwareen
dc.subjectApplication-specific instruction set processoren
dc.titleA Flexible Ultralight Hardware Security Module for EPC RFID Tagsen
dc.typeDoctoral Thesisen
dc.pendingfalse and Computer Engineeringen and Computer Engineeringen of Waterlooen
uws-etd.degreeDoctor of Philosophyen
uws.contributor.advisorAagaard, Mark
uws.contributor.affiliation1Faculty of Engineeringen

Files in this item


This item appears in the following Collection(s)

Show simple item record


University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages