Show simple item record

dc.contributor.authorNeufeld, Ryan Alexander Epp 18:42:21 (GMT) 18:42:21 (GMT)
dc.description.abstractLiquid crystal elastomers (LCEs) are a class of polymer networks which involve the incorporation of liquid crystal (LC) molecules into their polymer backbone or side chain. This results in anisotropy in their mechanical, optical, and electromagnetic properties similar to those exhibited by traditional LC materials. Their mechanical properties are highly coupled to the internal state of LC order, which can result in large mechanical deformations as LC order changes. This can occur in response to a variety of external stimuli such as changes in temperature, exposure to light, and application of external fields. The interplay between LC order and mechanical properties makes LCEs a highly promising class of functional materials and subsequently, they have been the subject of much research over the past several decades. However, developing an application of LCEs remains difficult in that their mechanical response is both complex and coupled to the state of liquid crystal order prior to cross-linking. Their physics are sufficiently complicated that in most cases, the use of pen-and-paper analysis is precluded. Additionally, the LCE fabrication process is complex and expensive, making trial-and-error experimental design methods unsuitable. This motivates the development and use of simulation-based methods to augment traditional experimental design methods. The two main contributors to the complexity of the design of LCE applications are the choice and imposition of liquid crystal order, or "texture", prior to cross-linking. In this work, simulation-based methods are developed and partially validated for use in applications-focused design of temperature-responsive nematic LCEs. These methods enable the simulation of LCEs of macroscopic size and of non-trivial geometry through the use of continuum mechanics and suitable numerical methods (the finite element method). LC texture is an input parameter in the presented method, allowing many choices of texture to be explored at low cost given that the textures are physically accessible. In addition to methods development and validation results, proof-of-concept simulation-based design studies were performed for two types of LCE-based actuators that are of current interest in the field: grippers and hinge mechanisms. Finally, preliminary results are presented resulting from the integration of nematic texture dynamics simulation (pre-cross-linking) and LCE mechanical simulations (post-cross-linking) which address the two main sources of complexity in the design process of LCE functional materials.en
dc.publisherUniversity of Waterlooen
dc.subjectliquid crystalsen
dc.subjectliquid crystal elastomersen
dc.subjectfinite element methoden
dc.subjectfunctional materialsen
dc.subjectsoft roboticsen
dc.subjectliquid crystal networksen
dc.titleSimulation-based Design of Temperature-responsive Nematic Elastomersen
dc.typeMaster Thesisen
dc.pendingfalse Engineeringen Engineering (Nanotechnology)en of Waterlooen
uws-etd.degreeMaster of Applied Scienceen
uws.contributor.advisorAbukhdeir, Nasser Mohieddin
uws.contributor.advisorZhao, Boxin
uws.contributor.affiliation1Faculty of Engineeringen

Files in this item


This item appears in the following Collection(s)

Show simple item record


University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages