Now showing items 1484-1503 of 15698

    • C3H6/NOx Interactions Over a Diesel Oxidation Catalyst: Hydrocarbon Oxidation Reaction Pathways 

      Oh, Harry Hyunsuk (University of Waterloo, 2012-08-29)
      C3H6 oxidation over a Pt/Al2O3 catalyst with or without NOx present was investigated. In particular, its reaction mechanism was studied using diffuse reflectance infrared spectroscopy (DRIFTS), a reactor system designed ...
    • Cache Coherency for Symmetric Multiprocessor Systems on Programmable Chips 

      Hung, Austin (University of Waterloo, 2004)
      Rapid progress in the area of Field-Programmable Gate Arrays (FPGAs) has led to the availability of softcore processors that are simple to use, and can enable the development of a fully working system in minutes. This ...
    • Cache Design for a Hardware Accelerated Sparse Texture Storage System 

      Yee, Wai Min (University of Waterloo, 2004)
      Hardware texture mapping is essential for real-time rendering. Unfortunately the memory bandwidth and latency often bounds performance in current graphics architectures. Bandwidth consumption can be reduced by ...
    • Cache Oblivious Data Structures 

      Ohashi, Darin (University of Waterloo, 2001)
      This thesis discusses cache oblivious data structures. These are structures which have good caching characteristics without knowing Z, the size of the cache, or L, the length of a cache line. Since the structures do ...
    • Cache-Aware Virtual Page Management 

      Szlavik, Alexander (University of Waterloo, 2013-02-22)
      With contemporary research focusing its attention primarily on benchmark-driven performance evaluation, studying fundamental memory characteristics has gone by the way-side. This thesis presents a systematic study of the ...
    • Cache-Oblivious Searching and Sorting in Multisets 

      Farzan, Arash (University of Waterloo, 2004)
      We study three problems related to searching and sorting in multisets in the cache-oblivious model: Finding the most frequent element (the mode), duplicate elimination and finally multi-sorting. We are interested in ...
    • CAD Techniques for Robust FPGA Design Under Variability 

      Kumar, Akhilesh (University of Waterloo, 2010-09-01)
      The imperfections in the semiconductor fabrication process and uncertainty in operating environment of VLSI circuits have emerged as critical challenges for the semiconductor industry. These are generally termed as process ...
    • Cadrages contemporains sur les paysages des littératures francophones du Canada Lepage 

      Lepage, Élise (Université Laval, 2015)
      Introduction to journal issue Temps zéro nº10 Introduction au dossier : Cadrages contemporains sur les paysages des littératures francophones du Canada
    • Cage-like Proteins as Bioink Components for 3D Bioprinting 

      Delgado, Adrian (University of Waterloo, 2018-01-24)
      Hydrogel matrices have been used as structural surrogates in 3D bioprinting as a mechanism to provide the appropriate environment for cell adhesion and proliferation. In this research, the preparation and optimization of ...
    • Calcium transport and delivery to the xylem in onion (Allium cepa L.) roots 

      Cholewa, Ewa M. (University of Waterloo, 2000)
    • Calculating Center-Glass Performance Indices of Glazing Systems with Shading Devices 

      Wright, John L. (American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2008)
      Building energy consumption and loads are strongly influ-enced by solar gain and heat transfer through the centre-glass area of windows. Methods have been devised to calculate the corresponding energy performance indices ...
    • Calculating Center-Glass Performance Indices of Windows 

      Wright, John L. (American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1998)
      Building envelope performance is strongly influenced by solar gain and heat transfer through windows. The majority of this energy gain or loss passes through the center-glass area of the glazing system. Various methods ...
    • Calculating Center-Glass Performance Indices of Windows with a Diathermanous Layer 

      Collins, Michael R.; Wright, John L. (American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2006)
      The fenestration chapter of the 2005 ASHRAE Hand-book—Fundamentals (ASHRAE 2005) has long included methods for determining the U-factor and solar heat gain coef-ficient (SHGC), or window performance indices, using the ...
    • Calculating the Solar Heat Gain of Window Frames 

      Wright, John L.; McGowan, Alexander G. (American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1999)
      It is not practical to measure the solar heat gain of a window frame. It is more practical to do so by calculation. Typically, the frame solar heat gain is a small component of the total or is small in absolute terms so ...
    • Calculating Window Solar Heat Gain 

      Wright, John L. (American Society of Heating, Refrigerating and Air-Conditioning Engineers, 1995-07)
      Window design has been revolutionized-largely by the introduction of low emissivity (low-e) coatings and substitute fill gases. The large number of design options necessitates the use of computer simulation for development ...
    • Calendar Aging and Lifetimes of LiFePO4 Batteries and Considerations for Repurposing 

      Catton, John (University of Waterloo, 2017-08-23)
      In response to rising petroleum prices, the demand for lower emissions standards for vehicles, and better vehicle fuel economy, the market for hybrid and electric vehicles is expanding. These systems incorporate advanced ...
    • Calibrant Free Sampling and Enrichment with Solid-Phase Microextraction: Computational Simulation and Experimental Verification 

      Alam, Md. Nazmul; Ricardez-Sandoval, Luis; Pawliszyn, Janusz (American Chemical Society, 2017-04-05)
      Despite the benefits of diffusion-based calibrant-free sampling based on solid-phase microextraction (SPME), this quantification approach is often underestimated due to an inadequate understanding of how extraction parameters ...
    • Calibration and 3D Model Generation for a Low-Cost Structured Light Foot Scanner 

      Viswanathan, NavaneethaKannan (University of Waterloo, 2013-01-25)
      The need for custom footwear among the consumers is growing every day. Serious research is being undertaken with regards to the fit and comfort of the footwear. The integration of scanning systems in the footwear and ...
    • Calibration and Analysis of the MESH Hydrological Model applied to Cold Regions 

      MacLean, Angela (University of Waterloo, 2009-09-30)
      Concerns regarding climate change have brought about an increased interest in cold region hydrology, leading to the formation of the IP3 research network. This work is part of the IP3 Network, which has the overall goal ...
    • Calibration and Model Uncertainty of a Two-Factor Mean-Reverting Diffusion Model for Commodity Prices 

      Chuah, Jue Jun (University of Waterloo, 2013-08-28)
      With the development of various derivative instruments and index products, commodities have become a distinct asset class which can offer enhanced diversification benefits to the traditional asset allocation of stocks and ...


      University of Waterloo Library
      200 University Avenue West
      Waterloo, Ontario, Canada N2L 3G1
      519 888 4883

      All items in UWSpace are protected by copyright, with all rights reserved.

      DSpace software

      Service outages