Dileep Chandran RamachandranElliot Biro2024-12-192024-12-192022-12-02https://doi.org/10.1016/j.mtla.2022.101644https://hdl.handle.net/10012/21280Emerging third-generation advanced high strength steels (3G AHSS) grades are being increasingly considered for autobody applications owing to their complex microstructures providing an excellent combination of strength and ductility. When welded with RSW, 3G AHSS such as 3G 1180 and 3G 980, exhibits a solid-state transformation in the sub-critical-heat-affected-zone (SCHAZ) due to the heat generated during the RSW process. The resulting changes in microstructure can affect the mechanical properties of the material within and around the spot welds and thereby influence the performance of welded components in case of a vehicle crash event. To study metallurgical transformations in the SCHAZ during the RSW process, 3G 1180 and 3G 980, and a reference martensitic press hardened steel, PHS 1500, were selected. These materials were subjected to isothermal tempering experiments at temperatures ranging between 350 °C and 650 °C and different tempering times from 0.2 s to 24 h. It was shown that the Hollomon-Jaffe model accurately describes the tempering kinetics of 3G 1180 and PHS 1500 but does not predict the transformation processes in the SCHAZ of 3G 980. The PHS 1500 and 3G 1180 showed softening (tempering) for all combinations of investigated tempering times and temperatures due to the decomposition of martensite. In contrast, the 3G 980 showed a combination of softening by the formation of martensite and secondary ferrite combined with secondary hardening due to the formation of fine M2C typed plate-like carbides. Furthermore, during long tempering, the M2C particles dissolve into the matrix and were replaced by cementite particles in 3G 980.enArticle