Browsing Mechanical and Mechatronics Engineering by Subject "Warm Forming"
Now showing items 1-4 of 4
-
A Component-Level Study on the Effect of Warm Forming on Formability and Springback of Aluminum Alloy Brazing Sheet
(University of Waterloo, 2018-01-23)This thesis investigates the effect of warm forming (up to 350⁰C) on the formability and springback behavior of AA3003/AA4045 brazing sheet (0.2 mm gauge) for three temper conditions: O-, H22- and H24-tempers. The geometry ... -
Formability of Aluminum Alloy Sheet at Elevated Temperature
(University of Waterloo, 2012-09-26)An experimental and numerical study of the isothermal and non-isothermal warm formability of an AA3003 aluminum alloy brazing sheet is presented. Forming limit diagrams were determined using warm limiting dome height (LDH) ... -
Modelling Microstructure-Property Relationships in Polycrystalline Metals using New Fast Fourier Transform-Based Crystal Plasticity Frameworks
(University of Waterloo, 2019-02-04)The present thesis develops several new full-field, fast Fourier transform (FFT)-based crystal plasticity modelling tools for microstructure engineering. These tools are used to explore elasto-viscoplastic deformation, ... -
Warm Forming Behaviour of ZEK100 and AZ31B Magnesium Alloy Sheet
(University of Waterloo, 2014-05-21)The current research addresses the formability of two magnesium sheet alloys, a conventional AZ31B and a rare earth alloyed ZEK100. Both alloys had a nominal thickness of 1.6 mm. Both Limiting Dome Height (LDH) and Cylindrical ...