Browsing Mechanical and Mechatronics Engineering by Subject "Lithium-ion battery"
Now showing items 1-7 of 7
-
Design and simulation of a lithium-ion battery at large C-rates and varying boundary conditions through heat flux distributions
(Elsevier, 2018-02-01)In this paper, the heat flux distributions on a prismatic lithium-ion battery at 1C, 2C, 3C and 4C discharge rates under various operating temperatures and boundary conditions (BCs) of 22 °C for air cooling and 5 °C, 15 ... -
Electrochemical-Thermal Modeling of Lithium-ion Batteries
(University of Waterloo, 2016-05-17)Incorporating lithium-ion (Li-ion) batteries as an energy storage system in electric devices including electric vehicles brings about new challenges. In fact, the design of Li-ion batteries has to be optimized depending ... -
Enhancing Mechanical Strength of Electrospun Nanofibers by Thermal Crosslinking and Coaxial Electrospinning
(University of Waterloo, 2023-06-14)Electrospinning of nonwoven nanofibrous mats has received significant attention in recent years due to the high versatility and porosity of electrospun mats. Specifically, considerable interest has developed in using ... -
Experimental and theoretical investigations of heat generation rates for a water cooled LiFePO4 battery
(Elsevier, 2016-10-01)Understanding the rate of heat generation in a lithium-ion cell is critical for its safety and performance behavior. This paper presents in situ measurements of the heat generation rate for a prismatic Lithium-ion battery ... -
Investigation into the Effect of Thermal Management on the Capacity Fade of Lithium-ion Batteries
(University of Waterloo, 2017-01-03)The popularity of electric (and hybrid) vehicles has raised the importance of effective thermal management for lithium-ion batteries, both to prevent thermal runaway leading to a fire hazard, and to minimize capacity fade ... -
Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery
(Elsevier, 2017-07-25)This paper has presented a comparative study of the temperature and velocity distributions within the mini-channel cold plates placed on a prismatic lithium-ion battery cell using experimental and numerical techniques. The ... -
Transient electrochemical heat transfer modeling and experimental validation of a large sized LiFePO4/graphite battery
(Elsevier, 2017-06-01)Both measurement and modeling of thermal performance in lithium-ion battery cell are considered crucial as they directly affect the safety. Even though the operation of a lithium-ion battery cell is transient phenomena in ...