Show simple item record

dc.contributor.authorMahdi, Anas
dc.date.accessioned2022-09-22 13:31:09 (GMT)
dc.date.available2023-09-23 04:50:05 (GMT)
dc.date.issued2022-09-22
dc.date.submitted2022-09-16
dc.identifier.urihttp://hdl.handle.net/10012/18775
dc.description.abstractMany elderly people suffer from a loss of mobility due to musculoskeletal disorders, neurological conditions, diabetes, frailty, or other impairments, and thus require assistance during walking and Sit-to-Stand (STS) transfers. Majority of commercially available mobility assistance devices are passive walkers, rollators, and canes which provide limited walking support and minimum support while standing up. Persons needing STS assistance typically rely on external forces applied by a person or a device to help them stand up. In this thesis, we will present the design and functionalities of SkyWalker, a novel lightweight robotic rollator with active STS assistance. It is made for providing powered walking support on different terrains. STS support relies on a bilevel handle design and consists of active vertical lift and forward translation support during STS, then a handle change by the user to fixed handles once standing. Stand-to-Sit transfer follows the reverse order. To evaluate the SkyWalker design and control and identify areas of improvement, we conducted experiments with healthy young adult subjects. A biomechanical study on STS motions compared 6 different STS trajectories for which the kinematic, kinetic, and user feedback were collected. Additionally, we tested SkyWalker's ability to support walking on different surfaces, on uneven terrain, and around obstacles. Finally, we conducted an interaction study to test voice control as a potential interface to allow the user to control the direction and movement of SkyWalker independently. The experiments showcased the walker as a potential assistive device and identified limitations to be addressed prior to experiments with frail subjects. The data collected and the feedback from the subjects show great potential for the robot to be used as an assistive device in an indoor and outdoor environment.en
dc.language.isoenen
dc.publisherUniversity of Waterlooen
dc.subjectassistive technologyen
dc.subjectbiomedical engineeringen
dc.subjectphysical human-robot interactionen
dc.subjectsit-to-standen
dc.subjectroboticsen
dc.subjectwalking aiden
dc.titleDesign of a Robotic Rollator for Sit-To-Stand and Walking Assistance of Older Individuals with Mobility Disordersen
dc.typeMaster Thesisen
dc.pendingfalse
uws-etd.degree.departmentMechanical and Mechatronics Engineeringen
uws-etd.degree.disciplineMechanical Engineeringen
uws-etd.degree.grantorUniversity of Waterlooen
uws-etd.degreeMaster of Applied Scienceen
uws-etd.embargo.terms1 yearen
uws.contributor.advisorMombaur, Katja
uws.contributor.affiliation1Faculty of Engineeringen
uws.published.cityWaterlooen
uws.published.countryCanadaen
uws.published.provinceOntarioen
uws.typeOfResourceTexten
uws.peerReviewStatusUnrevieweden
uws.scholarLevelGraduateen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record


UWSpace

University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages